Mallards Standing Around! Duck Hunting Decal - Hunting Sticker - 5057

Mallards Standing Around! Duck Hunting Decal – 6 Mallards Standing Around! Duck Hunting Sticker – 5057


SKU: WFD-5057-00 Brand:


Mallards Standing Around! Duck Hunting Decal – 6 Mallards Standing Around! Duck Hunting Sticker – 5057


  • Small 6″x 4″
  • Medium 12″x 8″

Available in White, Black and Chrome.

Additional charges include $1.50 for Chrome and $1.00 for Medium size.

Foundation Guidelines 

Surface Readiness: before decal foundation all surfaces must be cleaned and freed from remote material. For glass and set plastics – Clean surface with a cleaner . For metals – Clean surface with a dissolvable like naphtha or clean increasingly thin. Dry the surface with a development free texture before the dissolvable disseminates. License recently painted surfaces 3 weeks of fix time to off-gas before applying vinyl. 


Foundation Temperature: ensure that the surface and air temperature is above 10° Celsius. Clamminess above 90% can in like manner shield decals from following fittingly. 


Materials Required: Decal, squeegee, veiling paper , cutting edge or scissors, optional fluid (light frothy water) for mammoth decals, tape . 


Your decal will are available 3 layers: 


  1. move tape 


  1. vinyl decal 


  1. wax backing paper 


Foundation Directions: 

1) Clean and discovered the surface as depicted beforehand. ensure that your decal fits the planet by holding your decal against the surface. In case fundamental, use a tape to ensure the decal is that the spot you’d like it . 


2) Holding the decal where you would perhaps need it presented, securely tape it to the surface at the midpoint either on A level plane or vertically. (For this model we picked to some degree not actually almost the whole way because of the organizing of this specific decal). relying on your decal size you’ll found the opportunity to tape the decal at the corners or use 2 bits of tape at the center . the center bits of tape will turn into your rotate point. 


3) From supreme base (or top) corner of the decal, delicately strip the trade tape and decal away from the wax backing paper. Strip decal at a decent footing more vital than 160° until you arrive at the rotate point. Using your cutting edge, gently cut the wax backing paper along the turn point. Clear yet save this piece paper . 


4) just in the event that you’re using an application fluid, presently delicately sprinkle the basic an outsized bit of the surface where the decal is to be presented. 


5) While keeping the decal taught with one hand, gently use the squeegee to press the decal to the surface. Start at the hing point and work your way towards the outer edges. 


6) Rehash stages 3-5 for the opposite an outsized bit of the decal. 


7) Utilizing the squeegee, reaching out from the focal point of the decal towards the surface , oust any remaining liquid, air pockets or wrinkles. 


8) Beginning at the corner, strip the chief raised layer hiding paper away from the surface, again it’s optimal to intend to the present at some degree more essential than 160°. inside the occasion that any vinyl doesn’t stay with the surface carefully place it backtrack with the veiling and press it during additional. 


9) inside the occasion that you just notification any air pockets or wrinkles use the paper (saved from earlier) lay it on the decal and use the squeegee to press air pockets and wrinkles out. The paper shields your decal from being harmed. inside the occasion that air bubbles remain you’ll use alittle pin to pop them and press the affected locale to the surface.

Click for more Duck Hunting Decals

Additional information

Weight 0.2 lbs

Medium, Small


, , ,



There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.