Fins and Feathers Decal – Fins and Feathers Window Sticker – 15013

Angling yet Fish Silhouette Decals Fishing Stickers

Made on cost vinyl those Fishing linked Decals perform maintain going because years!With the essential critical need about oversea on doors connected decals/stickers Made inside the USA ye cannot flip badly together with our choice!Directions:

Spot sticky label over a sleek, non-permeable floor. stability Peel order clench from

sticker yet observe according to surface. glossy the decal together with Squeegee after evacuate

air bubbles, at that trouble reach outside protective.Made inside the USAAll buildings square excuse copyright ensured by skill so concerning WaterfowlDecals.Com or J.M. Scarpy Enterprises, LLCQuack

Fiend, Quack Attack, Elkaholic, Hardcore Waterfowler, Hooked on Quack,

Gooseaholic, If that Flies such Dies, Blow Me, Stickers, Decals, and

More…

Installation Instructions:

Do not apply decals in direct sunlight especially if the surface is hot. This will cause decal to prematurely stick. The ideal temperature to install these is 55-95 degrees.

The surface must be clean. If you see anything on the surface, you will see it under your sticker. I would use a razor blade to clean any large objects from the glass surface. You should use Isopropyl or Rubbing alcohol to clean surfaces when you want to install the decal. This needs to be wiped on heavy and wiped dry with a dry clean cloth or paper towel. DO NOT ALLOW ALCOHOL TO EVAPORATE. This will cause the contami nants to dry on the surface you were trying to clean. However, this does remove Car Wax, Rain-X and the like so you must reapply. Give the decal a week to two to fully cure in the sun before doing so.

Click to see more DEER HUNTING DECALS, HUNTING DECALS