Barrel Decal – Show Me Your Honkers – SBD002Shotgun Barrel Decals
Barrel Decal – Show Me Your Honkers – SBD002
Shotgun Barrel Decal – Gun Barrel Decal – Show Me Your Honkers
This is for one custom Barrel decal.They are no taller than .7″ Decal
Includes Two Decals – One for each side or one for two guns!
Gun Barrel Decal – Shotgun Barrel Sticker – Gun Barrel Sticker – Gun Barrel
Do not apply decals in direct sunlight especially if the surface is hot. This will cause decal to prematurely stick. The ideal temperature to install these is 55-95 degrees.
The surface must be clean. If you see anything on the surface, you will see it under your sticker. I would use a razor blade to clean any large objects from the glass surface. You should use Isopropyl or Rubbing alcohol to clean surfaces when you want to install the decal. This needs to be wiped on heavy and wiped dry with a dry clean cloth or paper towel. DO NOT ALLOW ALCOHOL TO EVAPORATE. This will cause the contami nants to dry on the surface you were trying to clean. However, this does remove Car Wax, Rain-X and the like so you must reapply. Give the decal a week to two to fully cure in the sun before doing so.