Upon receiving your decal in the mail – unroll and layout flat. Lightly squeegee out any wrinkles caused by the shipping process if necessary.
1. Apply to the outside of a window or smooth painted surface. It’s very important to clean a window or surface with rubbing alcohol, not Windex. Do not apply in direct sunlight, apply in the shade. Do not apply if the temperature outside is below 50 degrees. Also, trying a sample decal first will help if you’re unsure.
2. For larger decals some may prefer the wet installation. NOTE: The wet install works best for solid decals without a lot of small pieces, or small text. Wet window with a heavy mist of water, remove paper backing from decal and wet the sticky side with a mist of water also. Apply the decal to the wet surface. After it is in the desired place, squeegee out the water with a plastic squeegee. (You could use an I.D. or Credit Card for this.)
3. For smaller decals you can apply dry. Peel off the white paper backing and apply the sticky part to the glass or surface. Applying from one side to the other will reduce air bubbles. Rub or squeegee on with a plastic squeegee. (I.D. Cards work for this too)
4. Now, just peel off the remaining plastic or paper application tape very slowly at a sharp angle away from the decal. If the decal starts to come up, rub it again or squeegee more then try again patiently.
5. Air bubbles happen. They are a normal part of this type of decal. If you would like, you can try to remove them by popping them with a pin and rubbing them, but most will go away on their own. Wrinkles can usually be massaged away with a heat gun.
6. Maintenance tips: Do not over wax vehicle graphics. Using Windex to clean the decals may fade them faster. Most decals will last for several years but there is no guarantee as to how long they will actually last. Be sure to visit WaterfowlDecals.com for any future decal needs. We also offer custom vinyl decals and signage for your Club, Group, Business or Organization.
